Open Door via GDS37xx with or without a SIP Call
This feature needs related matching GDS37XX firmware to work. The minimum firmware version needed:
GDS3710: 1.0.7.19 or higher.
GDS3705: 1.0.1.13 or higher.
From GDS37XX side, the configuration is the same. Only difference is the number of doors be controlled: If using Local Relay controlled by GDS37XX,
TWO DOORS can be controlled.
If using GSC3570 Relay, ONLY ONE DOOR can be controlled. The PIN and other settings are the same as SIP remote open door or GSC3570 secure
open door for the GDS3710.
The difference will come out at the touch screen UI operation of GSC3570.
GDS37XX Configuration Example
GSC3570 Configuration Example
Door opening with SIP Call:
When GSC3570 established call with GDS37XX, the screen will display virtual open door button(s), and user will press the button to open door:
To Next Page
Loading...
