Open Door with SIP Call
GSC3570 Open Door NO SIP Call:
At the GSC3570 idle screen, press “Monitor →Door system”, the related GDS37XX will be displayed. In the blue bar, left is a “Phone”icon and right is
the “Open door”icon. The“Phone”icon will establish SIP call as previous firmware behaved.
Press “Open door” icon, the GSC3570 will open door directly and NO SIP CALL will be established. Depending on how many doors controlled, if one
door configured, the door will open directly; if two doors configured, another screen will pop up to allow user to choose which door to open, as
shown below:
When the door is successfully opened the following message will appear:
To Next Page
Loading...
