MJPEG Authentication Mode
1). Challenge+Response MJPEG Authentication Mode:
Please follow below steps in order to take a snapshot via HTTP commands on this mode:
1. In browser type in: http(s)://IP_Address_GDS:Port/jpeg/view.html
2. The browser will pop up the window above asking for credentials, user needs to enter admin credential.
GDS3712 Admin credentials page
3. The browser will show one frame of the video (720p) as a snapshot.
Snapshot view using secured MJPEG authentication Mode
2). Basic MJPEG Authentication Mode:
Please follow below steps in order to take a snapshot via HTTP commands:
Note
This is supported on all browsers without installing any plugin and requires admin user authentication for more security.
To Next Page
Loading...
