1. In browser type in: http(s)://admin:password@IP_Address_GDS:Port/jpeg/view.html
2. The browser will show one frame of the video (720p) as a snapshot.
MJPEG Stream
The GDS371x supports MJPEG Stream live viewing via HTTP API commands, this can be used without installing the Live view browser plugin. Starting
from firmware 1.0.3.34, users can deploy two methods to retrieve MJPEG stream depending on JPEG Authentication Mode, which can be set under
following path:
Web UI 🡺 System Settings 🡺 Access Settings
MJPEG Authentication Mode
1). Challenge+Response MJPEG Authentication Mode:
In order to get a live view stream using MJPEG stream over HTTP command on this mode, please follow the below steps:
1. In browser type in: http(s)://IP_Address_GDS:Port/jpeg/mjpeg.html
2. The browser will pop up the window above asking for credentials, user needs to enter admin credential.
Note
Please note that when the GDS371x device is added to UCM Remote Connect, then the MJPEG stream function will not work with the IP phone models
such as the GRP26xx and GXP21xx,and the Wi-Fi phone models such as the WP820, in this case, it is recommended to use a video phone model such as
the GXV34xx to stream video feed on the GXV34xx from the GDS371x.
To Next Page
Loading...
