.1. .2.
EN
PRECAUTIONS
• Please follow local building code and electrical code to
install the device.
• Suggest to install the device with bottom line 45~55 inches
(1.2~1.4 meters) above the ground lever.
• Please avoid dropping or vigorous vibrating of the device.
• Please keep device away from strong electromagnetic
field or explosive atmosphere.
• Do not open or install the device in damp environment.
Avoid using the device in very low or high temperature
environment.
• Recommend to seal the frame or wall gap with silicone or
other sealant after installation to avoid inside water leaking.
• Remove the electrostatic adsorption protective plastic film
after all installations/configurations to avoid lens cover
contamination or scratch.
• Please refer to Grnadstream website for more
updated Online Documents like:
QIG:
www.grandstream.com/sites/default/files/
Resources/GDS3705_QIG.pdf
www.grandstream.com/sites/default/files/
Resources/GDS3710_QIG.pdf
User Manual:
www.grandstream.com/sites/default/files/
Resources/GDS3705_UserManual.pdf
www.grandstream.com/sites/default/files/
Resources/GDS3710_UserManual.pdf
FAQ:
www.grandstream.com/our-products
This guide applies to both GDS3705 and GDS3710,
with GDS3710 in the illustration.
The warranty not apply to defects and failures as a result of improper
installation.
The manufacturer is neither liable for damages caused by theft within an
area that is accessible after the attached electric lock is switched. The
product is not designed as a burglar protection device except when used
in combination with a standard lock.
If the proper mounting instructions not met, water might get in and destroy
the electronics as the internal circuits are under continuous operation.
The manufacturer's warranty shall be void for products damaged in this way.