Figure 4: GRP260X Back Side View
Configuration via Keypad
To configure the LCD menu using phone’s keypad, follow the instructions below:
• Enter MENU options. When the phone is in idle, press the round MENU button or Menu Softkey
to enter the configuration menu.
• Navigate in the menu options. Press the arrow keys UP/DOWN keys to navigate in the menu options.
• Enter/Confirm selection. Press the round MENU to enter the selected option.
• Exit. Press Return Softkey to exit to the previous menu.
• Return to Home page.
The MENU options are listed in the following table.
Table 7: Configuration Menu
Displays account status, network status, software version number and Hardware
• Warnings
Press to display the received warnings. Press on a warning for more details.
• Network status.
o Ethernet
Press to enter the sub menu for IP setting information (DHCP/Static IP/PPPoE),
IPv4 address, IPv6 address, MAC address, Subnet Mask, Gateway and NTP
To Next Page
Loading...
Need help?
General
