Grandstream Networks GRP2614 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 52
Explanation of example rule (reading from left to right):
• ^1900x. — prevents dialing any number started with 1900;
• <=1617>[2-9]xxxxxx — allows dialing to local area code (617) numbers
by dialing 7 numbers and 1617 area code will be added automatically;
• 1[2-9]xx[2-9]xxxxxx |- allows dialing to any US/Canada Number with 11
digits length.
• 011[2-9]x — allows international calls starting with 011;
• [3469]11 — allows dialing special and emergency numbers 311, 411,
611 and 911.
Note: In some cases, where the user wishes to dial strings such as *123 to
activate voice mail or other applications provided by their service provider,
the * should be predefined inside the dial plan feature.
An example dial plan will be: {*x+} which allows the user to dial * followed by
any length of numbers.
Bypass Dial Plan
Enable/Disable the dial plan bypass while dialing through:
• Contact
• Call History Incoming Call
• Call History Outgoing Call
• Dialing Page
• MPK
• API
The default setting is “MPK”.
Call Log
Configures Call Log setting on the phone.
• Log All Calls
• Log incoming/Outgoing Only (missed calls NOT recorded)
• Disable Call Log
The default setting is “Log All Calls”.
Send Anonymous
If set to “Yes”, the “From” header in outgoing INVITE messages will be set to
anonymous, blocking the Caller ID to be displayed. Default is “No”.
Anonymous Call
Rejection
If set to “Yes”, anonymous calls will be rejected. The default setting is “No”.
Auto Answer
If set to “Yes”, the phone will automatically turn on the speaker phone to
answer incoming calls after a short reminding beep. Default setting is “No”.
Refer-To Use Target
Contact
If set to “Yes”, the “Refer-To” header uses the transferred target’s Contact
header information for attended transfer. The default setting is “No”.
Transfer on
Conference Hang-up
If set to “Yes”, when the phone hangs up as the conference initiator, the
conference call will be transferred to the other parties so that other parties
will remain in the conference call. The default setting is “No”.

Grandstream Networks GRP2614 Specifications

General

Brand	Grandstream Networks
Model	GRP2614
Category	IP Phone
Language	English