Grandstream Networks GRP2615 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 62
Mute Key Functions
While Idle
Specifies the function of mute key in idle. Default setting is “DND”.
When select “Idle Mute” and press Mute key while idle, the future incoming
call will be answered with mute. When select “Disabled”, Mute key will not
take effect while idle.
The default setting is “DND”.
DND Override
Allows the phone to accept certain incoming calls while set to DND mode.
• Off: all incoming calls will not be accepted.
• Allow all: all incoming calls will be allowed.
• Allow Only Contacts: only incoming calls from numbers in the local
phonebook will be accepted.
• Allow Only Favorites: only incoming calls from favorite numbers in the
local phonebook will be accepted.
The default setting is “Off”.
Disable Transfer
Enables/disables transfer feature. If disabled, call transfer will not be
possible. Default setting is “No”.
In-call Dial Number on
Pressing Transfer Key
Configures the number to be dialed as DTMF using TRANSFER button.
Attended Transfer
Mode
If set to "Static", attended transfers can only be performed with pre-
established calls. If set to "Dynamic", attended transfers can be performed
with pre-established calls OR be initiated during the transfer process. This
option does not affect the user's ability to perform blind transfers.
The default setting is “Dynamic”.
For more details about “Static” / “Dynamic” transfer, refer to the user guide.
Transfer Mode via VPK
Perform “Blind Transfer”, “Attended Transfer”, or a “New Call” with the
specified number in the Value field when a user presses "Transfer" virtual
multiple-purpose key. Default is “Blind Transfer”.
Hold Call in Transfer
When set to "No", phone will neither hold the current call in transfer window
nor hold the call with the transfer target before referring the call in the
attended transfer. The default setting is “Yes”.
Show On Hold
Duration
Show the duration of holding a call on the LCD.
The default setting is “Yes”.
Do Not Escape #
as %23 in SIP URI
Specifies whether to replace # by %23 or not for some special situations.
The default setting is “No”.
Click-To-Dial Feature
Enables Click-To-Dial feature. If this feature is enabled, user could click the
green dial button on left top corner of phone’s Web GUI, then choose

Grandstream Networks GRP2615 Specifications

General

Brand	Grandstream Networks
Model	GRP2615
Category	IP Phone
Language	English