Grandstream Networks GRP2615 Administration Guide

GRP2600 Administration Guide
Version 1.0.5.15
P a g e | 70
http://htmlcolorcodes.com/ . If an invalid code is configured, the phone will
use default value #000000 instead.
Wallpaper Server Path
Specifies the wallpaper server path. This option will take effect when
wallpaper source is “Download”.
Upload Wallpaper
Click on the “Upload” button to browse and upload the desired wallpaper file.
This option will take effect when wallpaper source is “Uploaded”.
Color Background
Enter a color you wish to use in HEX format. E.g. #000000
Reference: http://htmlcolorcodes.com
Please note the user must select “Color Background” in “Wallpaper Source”
option in order to use the configurable color background code.
Screensaver
Screensaver
Configures Screensaver Feature, or “to enable Screensaver feature if no
VPK is active”. Please note this option is also available under LCD→
Menu→ Preference→ Appearance. The phone will consider the page
active if VPK is in Early (ringing), Trying (dialing) and Confirmed (talking)
status when VPK is configured with mode “BLF”, “Eventlist BLF” or
“Presence”. By default, screensaver is set to “On if no VPK is active”.
Screensaver Source
Sets the location where screensaver is loaded from.
Show Date and Time
Allows to see time and date on phone’s screensaver mode.
Default setting is “Yes”.
Screensaver Timeout
Configures the minutes of idle before the screensaver activates. Valid range
is 3 to 60. The default time is 3 minutes.
Screensaver Server
Path
Configures the server path which contains download screensaver definition
XML.
Screensaver XML
Download Interval
Configures the screensaver XML download interval (in minutes). If set to 0,
automatic download will be disabled. Valid range is 5 to 720. The default
setting is “0”.
Settings → Preferences → MPK LCD Settings (Available on GRP2614 only)
MPK LCD Display
Order
Selects display mode for MPK LCD.
• Sequential mode: MPKs will be displayed from left side to right side.
• Alternating Mode: MPKs with even ID will be displayed on left side
while MPKs with odd ID will be displayed on right.
The default setting is “Sequential”.
Display Contact on
MPK LCD
Select whether or not to display contact on MPK LCD.
The default setting is “No”.
Wallpaper
Wallpaper Source for
MPK LCD
Specifies the location where wallpapers for MPK LCD are stored. Default or
Uploaded. The default setting is “Default”.

Grandstream Networks GRP2615 Specifications

General

Brand	Grandstream Networks
Model	GRP2615
Category	IP Phone
Language	English