the configured Speed Dial number using account 2.
• Dial DTMF
Enter a series of DTMF digits in the Value field to be dialed during the
call. “Enable MPK Sending DTMF” has to be set to “Yes” first.
• Voice Mail
Select Account & enter the Voice Mail access number in the Value field.
• Call Return
The last answered calls can be dialed out by using Call Return.
The Value field should be left blank. Also, this option is not binding to
the account and the call will be returned based on the account with the
last answered call.
• Intercom
Select Account, and enter the extension number in the Value field to do
the intercom.
• LDAP Search
This option is to narrow the LDAP search scope. Enter the LDAP search
base in the Description field. It could be the same or different from the
Base in LDAP configuration under Advanced Settings.
The Base in LDAP configuration will be used if the Description field is
left blank. Enter the LDAP Name/Number filter in the Value field.
For example: If users set MPK 1 as “LDAP Search” for “Account 1”, and
set filters:
Description -> ou=video,ou=SZ,dc=grandstream,dc=com
Value -> sn=Li
Since the Base for LDAP server configuration is
“dc=84randstream,dc=com”, “ou=video,ou=SZ” is added to narrow the
LDAP search scope. “sn=Li” is the example to filter the last name.
• Call Log
Select Account and enter account number in the Value field to access to
the Call Log of that selected account.
• Information
Select this feature in order to display the Information popup to show the
firmware version, MAC address, IP address and IP Settings from the
MPK buttons, no field dis required for configuration.
• Message
Select this feature in order to display the Message menu from the MPK
To Next Page
Loading...
Need help?
General
