Need help?Do you have a question about the Grandstream Networks GXP1630 and is the answer not in the manual?
General| Lines | 3 |
|---|---|
| QoS | Layer 2 QoS (802.1Q, 802.1P) and Layer 3 (ToS, DiffServ, MPLS) |
| Bluetooth | No |
| Wi-Fi | No |
| Network Interface | Dual 10/100/1000 Mbps Gigabit Ethernet ports |
| PoE | Yes |
| Audio Codec | G.711, G.722 |
| Speakerphone | Yes |
| Headset Support | Yes |
| Protocols Supported | SIP (RFC3261) |
Details key features for GXP1610/1615/1620/1625/1628 models, including display, audio, ports, and programmability.
Details key features specific to the GXP1630 model, covering its display, audio, ports, and programmability.
Comprehensive technical details for all GXP16XX models, covering protocols, interfaces, display, keys, codecs, and security.
Lists all items included in the GXP16XX phone package for setup and use.
Step-by-step guide on physically connecting the phone's components like handset, network, and power.
Instructions for attaching the phone stand to the device for desktop placement.
Instructions for mounting the phone on a wall using its designated slots.
Details on FCC/CE compliance and safety standards the phone adheres to.
Information on the product warranty, including conditions for repair, replacement, and support.
Describes the phone's display when not in use, including date, time, and softkey functions.
Explanation of the phone's keypad layout and the function of each button.
Guide on how to input characters and numbers using the phone's keypad for various functions.
How to switch audio output between handset, speaker, and headset during calls.
Configuration and use of SIP accounts and line mapping for making calls.
Methods for initiating and finishing phone calls, including on-hook and off-hook dialing.
Instructions for making direct IP calls between phones without a SIP proxy.
How to handle single and multiple incoming calls, including call waiting.
Enabling/disabling the Do Not Disturb feature to manage incoming calls.
Procedure for recording calls, typically via integration with a UCM series server.
Managing calls by placing them on hold or switching between multiple active calls.
Muting and unmuting the microphone during an active call.
Enabling speaker listening for multiple participants during a call.
Performing blind, attended, and auto-attended transfers of active calls.
Setting up and managing 3-way or 4-way conference calls.
Using a simplified method for establishing conference calls, often integrated with traditional methods.
Enabling or disabling anonymous call features for outgoing calls.
Disabling call waiting for a specific call when the phone is in use.
Setting up forwarding for all incoming calls to another number.
Configuring call forwarding when the phone line is busy.
Setting up call forwarding if there's no answer from the phone.
Setting up a programmable key to open doors directly from the phone's idle screen.
Instructions for connecting and using Plantronics EHS headsets with the phone.
Steps to reset the phone to factory defaults using the device's LCD menu.
Steps to reset the phone to factory defaults using its web-based graphical user interface.
To Next Page