HT70X User manual
Version 1.0.9.4
G.711 + Annex I (PLC), Annex II (VAD/CNG format) encoder and decoder,
G.723.1, G.726-32(ADPCM), G.729, iLBC, G.726-32 provides proprietary VAD,
CNG, and signal power estimation, Voice Play Out unit (reordering, fixed and
adaptive jitter buffer, clock synchronization), AGC (automatic gain control), Status
output, Decoder controlling via voice packet header
T.38 compliant Group 3 Fax Relay up to 14.4kpbs and auto-switch to G.711 for
Fax Pass-through, Fax Datapump V.17, V.19, V.27ter, V.29 for T.38 fax relay
Diffserve, TOS, 802.1 P/Q VLAN tagging
Flexible DTMF transmission method, user interface of In-audio, RFC2833, and/or
SIP Info
TFTP, HTTP, HTTPS, TR-069, XML
TLS/SIPS , SIP over TCP/TLS
Web interface or via secure encrypted AES or non-encrypted central configuration
file for mass deployment using Grandstream binary file or xml format.
Auto/manual provisioning system or via built-in IVR.
NAT-friendly remote software upgrade (via TFTP/HTTP/HTTPS) for deployed
devices including behind firewall/NAT.
Syslog support. Full support of TR-069 management protocol and Telnet access.
Bellcore Type 1 & 2, ETSI, BT, NTT, and DTMF-based CID
Caller ID display or block, Call waiting caller ID, Call waiting/flash, Call transfer,
hold, forward, 3-way conferencing, message waiting, Do-Not-Disturb (DND), call-
return service