Grandstream Networks HT802 Self-Installation And Configuration Guide

ATA Self-installation and Configuration Guide 3
This guide is only intended for installation of ATA devices over a public internet connection, also referred
to as over-the-top (OTT).
NOTE: If you are porting your telephone number from another service provider, you may experience a
service outage between 7:00am GMT-6 no DST (when the service is provisioned) and 9:00am GMT-6 no
DST (when the numbers are ported over from the other service provider). This is dependent upon a
successful self-install of the devices between these hours. At 7:00am GMT-6 no DST, outgoing calls can
be made with customer installed and configured devices. Incoming calls will not be successful to IBC
devices until the port has been completed.
GETTING STARTED
What you need to get started:
•
The ATA, ethernet cable, and power cord.
•
A computer that is on the same network as the ATA.
•
Configuration credentials. An email will be sent on the date of your service order from the
SaskTel Business Team with a subject line of
IBC login and support
. Included in the email
will be your IBC User ID and password, along with your ATA user name (10-digit phone
number) and password. You will need these configuration credentials for this process.
Keep
this email for future reference
. Contact your Service Representative if you did not receive
the email.
CONFIGURING THE ATA
1. Connect the ATA to a power source using the power cord provided. A blue power light will come on.

Grandstream Networks HT802 Specifications

General

Brand	Grandstream Networks
Model	HT802
Category	Adapter
Language	English