3 Safety Information
Warnings!
Never look directly into optical outputs or a fiber while the equipment is on.
Invisible laser beam may damage your eyes.
Do not short-circuit the terminal of AC adapter / charger and the batteries.
Excessive electrical current may cause personal injury due to fumes,electric
shock or equipment damage.
Connect DC power cord with the equipment and wall socket properly. While
inserting the DC plug, make sure there is no dust or dirt on the terminals and
both plugs are fully seated. Incomplete engagement may cause fuming,
electric shock or equipment damage and may result in personal injury.
Do not operate the equipment near hot objects, in hot environments, in dusty/
humid atmosphere or when condensation is present on the equipment. This
may result in electric shock , product malfunction or poor performance.
4
FHS2 / Safety Information
To Next Page
Loading...
