Grape Solar GS-100-KIT User Manual

Grape Solar 100 Watt Off Grid Kit
(GS-100-KIT)
Installation Guide
IMPORTANT: Please read the GS-PWM-COMET-40 Owner’s Manual and the
Panel User Guide (included with panels) before assembling this kit.
www.grapesolar.com
Tel. 1-877-264-1014 (toll free), 1-541-349-9000, Fax: 1-541-343-9000
1
©Copyright 2016, Grape Solar, Inc. All Rights Reserved
For additional information about this kit visit grapesolar.com/manuals.html, or email support@grapesolar.com
GS-100+KIT EXPANDABLE PHOTOVOLTAIC
POWER GENERATION SYSTEM
CONFIGURATION MANUAL Rev. 180601
Valid from June 2018
Required tools: Philips-head screwdriver
Recommended tools: insulated wrench or other insulated tool for battery connections, digital multimeter or voltmeter
Basic Wiring Diagram

Grape Solar GS-100-KIT Specifications

General

Brand	Grape Solar
Model	GS-100-KIT
Category	Battery Charger
Language	English

Summary

Basic Wiring Diagram

Installation Steps and Procedures

Part Verification

Check that all components for the 100 watt kit are included as specified.

Panel Preparation for Daylight Connection

Cover the solar panel to prevent power output and orient it facing south.

Charge Controller Mounting

Mount the charge controller, ensuring it is in a NEMA-4 enclosure if outdoors.

Battery Connection to Charge Controller

Connect the battery terminals to the charge controller's battery inputs using the provided cable.

MC4 Cable Preparation

Cut the 15-foot MC4 cable in half and strip the ends, marking the positive lead.

Panel to Fuse Connection

Connect the positive MC4 output of the panel to the 10 amp inline fuse.

Panel Connection to Controller

Connect the fused positive panel cable and the negative panel cable to the controller's PV inputs.

System Activation and Float Mode

Uncover the panel and observe the controller display; aim for the battery to reach Float mode weekly.

Documentation and Safety Information

Exclusion for Documentation

Seller disclaims warranty for accuracy/suitability of technical information provided.

Code Compliance and Installer Qualifications

Installations must be code-compliant; installers need knowledge of local electrical codes.

Fuse and Breaker Requirements

Use proper fuses or breakers to comply with local and national codes; contact Grape Solar for recommendations.

Battery Compatibility

Use identical batteries of the same type, size, and age to avoid performance anomalies.