To Next PageTo Next Page
Need help?Do you have a question about the Graphite 58G716 and is the answer not in the manual?
Lists prohibited actions and misuse of the tool.
Lists compatible tools and accessories for safe operation.
Explains the meaning of the symbols and icons used in the manual.
Emphasizes using the tool only as intended.
Lists the included accessories and equipment with the tool.
Step-by-step guide for attaching the auxiliary handle.
Instructions for fitting the depth stop for controlled drilling.
How to insert and secure drill bits and accessories.
How to start and stop the tool, including continuous operation.
How to activate the lock-on feature for continuous use.
Explains how to use the speed control wheel for variable speeds.
How to change the drill's rotation direction (forward/reverse).
How to select between drilling and hammer drilling modes.
Guidance on drilling techniques, including deep and large holes.
Step-by-step guide for replacing the drill chuck.
Instructions for replacing worn carbon brushes.
Lists the technical specifications and data of the tool.
General| Power source | Corded Electric |
|---|---|
| Power | 710 W |
| Chuck size | 13 mm |
| Drilling capacity in steel | 13 mm |
| Drilling capacity in wood | 30 mm |
| Rotational speed | 0 - 2800 rpm |
| Spindle thread | 1/2" x 20 UNF |
