Graphite 58G874 - Page 13

13
TECHNICAL PARAMETERS
RATED PARAMETERS
Hammer Drill
Parameter Value
Rated voltage 230 V AC
Input current frequency 50 Hz
Rated power 1250 W
No load rotational speed 450 rpm
Chuck SDS-MAX
Maximum drilling diameter concrete 40 mm
Impact energy 10 J
Impact rate 2800 min
-1
Protection class II
Weight 7,3 kg
Year of production 2014
NOISE LEVEL AND VIBRATION PARAMETERS
Sound pressure: Lp
A = 95,1 dB(A) K = 3 dB (A)
Sound power: LwA = 106,1 dB(A) K = 3 dB (A)
Weighted value of vibration acceleration (impact drilling): a
h
= 19,402 m/s
2
K = 1,5 m/s
2
Weighted value of vibration acceleration (impact only): a
h
= 18,685 m/s
2
K = 1,5 m/s
2
ENVIRONMENT PROTECTION
Do not dispose of electrically powered products with household wastes, they should be utilized in proper plants.
Obtain information on wastes utilization from your seller or local authorities. Used up electric and electronic equipment
contains substances active in natural environment. Unrecycled equipment constitutes a potential risk for environment
and human health.
* Right to introduce changes is reserved.
“Grupa Topex Spółka z ograniczoną odpowiedzialnością” Spółka komandytowa with seat in Warsaw at ul. Pograniczna 2/4 (hereinafter Grupa
Topex) informs, that all copyrights to this instruction (hereinafter Instruction), including, but not limited to, text, photographies, schemes,
drawings and layout of the instruction, belong to Grupa Topex exclusively and are protected by laws accordingly to Copyright and Related
Rights Act of 4 February 2004 (ustawa o prawie autorskim i prawach pokrewnych, Dz. U. 2006 No 90 item 631 with later ammendments).
Copying, processing, publishing, modications for commercial purposes of the entire Instruction or its parts without written permission of
Grupa Topex are strictly forbidden and may cause civil and legal liability.