GRAPHTEC GL820 - Quick Start Guide Manual

GL820
Quick
Start
Guide
GRAPHTEC
Sd
Postion
swerve
REVIEW
Thank you for choose the midi LOGGER GL820
This Quick Start Guide describes the basic op jons.
Please refer to the manual (PDF) in the CD-ROM for more information.
Checking the Outer Casing
After unpacking, check the GL820's Exterior to make sure that
there are crack or other damage before use.
Checking the Accessories Don't forget to
o Quick Start Guide ; 1 See eng
o CD-ROM : 1
o AC cable/AC adapter : 1
Setting and Checking the AC Line Frequency
Set the AC line frequency in the “OTHR” menu. This setting
(50 or 60 Hz) affects the noise reduction performance of the device.