GRAPHTEC gl200 User Manual

midi LOGGER
SERVICE MANUAL
200/ 200A
GL200-UM-251
GL200-UM-251-05-9370

GRAPHTEC gl200 Specifications

General

Brand	GRAPHTEC
Model	gl200
Category	Data Loggers
Language	English

Summary

1. CONFIGURATION

2. UPGRADING THE FIRMWARE

2.1 How to Upgrade the GL200/A Flash ROM from the USB memory device

Step-by-step guide to update the device's firmware using a USB drive.

3. DISASSEMBLY AND REASSEMBLY

3.4 Replacing the Main Control Board

Guide for replacing the main control board within the unit.

3.5 Replacing the Control Panel Board

3.6 Replacing the LCD

3.7 Replacing the AMP Board

3.8 Replacing the Input Terminal Board

4. SETUP PROCEDURES

4.3 Performing Setup1 (Voltage Input)

Steps for performing Setup 1, related to voltage input calibration.

4.4 Performing Setup2 (Room Temperature Compensation)

Guide for performing Setup 2, focusing on room temperature compensation.

5. INSPECTION AND CHECK PROCEDURES

5.1.1 Measurement Accuracy

Procedure to verify and check the accuracy of measurements.

5.1.2 Temperature Accuracy

Procedure to verify and check the accuracy of temperature readings.