19.00 h9.00 h
64
Duration
Pause
Duration of the cycle
Channel ON
Channel OFF
Period
Start time
Stop
time
C
Cycle programming
The cycle duration must not be less than
the period
No nesting of cycle programs is allowed
A cycle switching command consists of:
• Start time
• Duration = ON switching duration
• Period = ON switching duration + pause
• Cycle duration = time between channel
ON and channel OFF
• Stop time
Example:
Channel 1 is switched on every 30 minutes for 10
minutes, starting on Monday 900 am
The stop time is Friday 700 pm
Start time Monday 0900 am
Duration 10 min
Period 30 min
Stop time Friday 0700 pm
To Next Page
Loading...