GRATTEN GA1022CAL User Manual

Detailed description of the oscilloscope's front panel controls and interface elements.

Essential guidelines for probe safety, attenuation settings, and proper compensation procedures.

Comprehensive guide to the oscilloscope's menu system and operational keys for efficient use.

Configuration of vertical and horizontal display settings for optimal waveform viewing and analysis.

Setting up trigger types, sources, and modes to capture specific signal events accurately.

Utilizing measurement tools and saving/recalling waveform and setup data for later analysis.

Accessing system status, self-tests, firmware upgrades, and online help resources.

Performing fundamental measurements like frequency and peak-to-peak voltage on signals.

Using cursor measurements, noise analysis, and X-Y mode for detailed signal examination.

Explanations of various system messages displayed by the oscilloscope for user guidance.

Step-by-step guide to diagnose and resolve typical oscilloscope operational problems and errors.

Information regarding product warranty, recommended maintenance procedures, and service contacts.

Electrical specifications for input coupling, impedance, and signal acquisition parameters.

Technical details for vertical/horizontal systems, display modes, and trigger capabilities.

Specifications covering measurement functions, hardware counters, and general system performance.

Default configurations for channel settings, mathematical operations, and horizontal system.

Default configurations for cursor, measurement functions, and various trigger types.