Need help?Do you have a question about the GRATTEN GA1102CAL and is the answer not in the manual?
Details trigger types, sources, modes, coupling, and hold-off settings.
Describes acquisition modes like sampling, peak value, and averaging.
Explains scale, cursor, and automatic measurement functions.
Demonstrates basic signal measurements like frequency and peak-to-peak value.
Shows how to perform precise measurements using cursors for time and voltage.
Lists and explains various system messages and their meanings.
Provides solutions for common display and signal acquisition issues.
Lists detailed technical specifications of the oscilloscope.
General| Model | GA1102CAL |
|---|---|
| Bandwidth | 100 MHz |
| Channels | 2 |
| Sample Rate | 1 GSa/s |
| Display | 7 inch TFT LCD |
| Display Resolution | 800 x 480 pixels |
| Vertical Sensitivity | 2 mV/div to 10 V/div |
| Time Base | 2 ns/div to 50 s/div |
| Trigger Modes | Edge, Pulse, Video, Slope, Alternate |
| Power Supply | 100-240 V AC, 50/60 Hz |
| Category | Oscilloscope |
| Input Impedance | 1 MΩ ± 2% |
| Interface | USB Host, USB Device |
| Math Functions | FFT |
To Next Page
