AWD SWITCH (IF EQUIPPED)
The AWD switch has three positions: All
Wheel Drive (AWD), Differential Lock/Two
Wheel Drive (2WD) and Off (1WD/Turf
Mode).
Press the top of the switch to engage All
Wheel Drive (AWD).
Move the switch to the center position to lock
the differential and operate in two wheel drive
(2WD).
Press the bottom of the switch to unlock the
differential and allow the rear drive wheels to
operate independently (1WD). This mode of
operation is well suited to turf driving or when
active traction is not needed.
PULSE BAR
The Pulse Bar
q
is located under
the hood and can be used to
connect any Pulse Bar accessory to
the vehicle. The Pulse Bar receives
constant and switched power from
the battery, so that accessories may
be powered whether the vehicle is
on or off.
31
FEATURES AND CONTROLS
To Next Page
Loading...
