BREAK-IN PERIOD
The break-in period consists of the first 25 hours of operation. Careful treatment
of a new engine and drive components will result in more efficient performance
and longer life for these components.
• Drive vehicle slowly at first while varying the throttle position. Do not operate
at sustained idle.
• Perform regular checks on fluid levels and other areas outlined on the daily
pre-ride inspection checklist.
• Change both the engine oil and filter after 25 hours or one month.
MAINTENANCE INTERVALS
The maintenance interval charts list required maintenance and inspection based
on vehicle hours / miles. Each table states a service that corresponds to the
hour / mile chart below. Some items or components may need to be serviced
more often due to severe use, such as operation in water, extreme
temperatures, or under severe loads. When the vehicle goes beyond 500 hours /
5000 miles, return to the 50 hours / 500 mile chart and start the interval process
over.
HOUR / MILEAGE SERVICE
25 hour / 250 mile Break-In Service
50 hour / 500 mile
q
100 hour / 1000 mile
w
150 hour / 1500 mile
q
200 hour / 2000 mile
w e
250 hour / 2500 mile
q
300 hour / 3000 mile
w
350 hour / 3500 mile
q
400 hour / 4000 mile
w e
450 hour / 4500 mile
q
500 hour / 5000 mile
w r
94
MAINTENANCE
To Next Page
Loading...
