Adam Hall GmbH · Daimlerstr. 9 · 61267 Neu-Anspach · Germany
Tel.: (+49) 60 81 / 94 19 0 · Fax: (+49) 60 81 / 94 19 1000 · eMail: mail@adamhall.com
SAFETY INFORMATION
1. Please read these instructions carefully before you start installation and assembly.
2. Keep all information and instructions in a safe place.
3. Follow the instructions.
4. Observe all safety warnings. Never remove safety warnings or other information
from the equipment.
5. Be attentive when setting up the product and protect yourself from injury.
6. This product is intended for indoor use only. Using it outdoors could lead to
product failure and personal injury.
7. Do not modify this equipment.
8. Comply with all applicable disposal laws in your country. During disposal of
packaging, please separate plastic and paper/cardboard.
9. Plastic bags must be kept out of reach of children.
10. If you have any questions refering to this instruction or any warnings, please
contact your local distributor.
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at: http://www.
adamhall.com/media/shop/downloads/documents/manufacturersdeclarations.
pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Daimler Straße 9, 61267 Neu Anspach / Email Info@adamhall.com /
49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT
(WASTE ELECTRICAL AND ELECTRONIC EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation)
This symbol on the product, or the documents accompanying the product, indicates
that this appliance may not be treated as household waste. This is to avoid environ-
mental damage or personal injury due to uncontrolled waste disposal. Please dis-
pose of this product separately from other waste and have it recycled to promote
sustainable economic activity.
FEATURES
Elegant design
Holds up to 2 pairs of headphones or headsets
2 convenient cable slots
Aluminium base and tower
INTRODUCTION
Designed for both home and professional use, this elegant table top headphones
stand securely holds up to two large sets of headphones. Convenient slots on the
holder facilitate convenient and tidy routing and storage of cables or ear buds.
The stand features a die-cast aluminium base and tower construction, whereby
the holder itself is made of plastic with a rubberised nish.
SPECIFICATIONS
Product type: Headphones
Material: plastic, aluminium
Colour: black
Support width: 60 mm
Deck depth: 100 mm
Stand height: 265mm
Base dimensions: 106 x 128 mm
Interchangeable rings: no
Black ring pack included: no
Weight: 0.48 kg
GHPHTT01B
Table top headphones stand
headphones not included
To Next Page
Need help?
General