GRAVITY Hammer User Manual



Owner’sInstructionManual

WARNING  
READTHEOWNER’SMANUALBEFOREUSE.




GRAVITY Hammer Specifications

General

Type	Sledge Hammer
Handle Material	Fiberglass
Handle Length	36 inches
Head Material	Steel
Color	Black

Summary

Assembling the Hammer

Outrigger Leg Adjustment

Instructions for loosening, swinging outward, and retightening outrigger adjustment levers.

Wrench Location and Removal

Main Ramp Placement on Base

Lowering the main ramp onto the base and positioning the knobs at the rear.

Securing Main Ramp and Wrench Return

Setting up Ramp to Floor Height

Initial Height Check and Tilt-to-Aim Activation

Loosening Height Adjustment Bolts

Locating and loosening the adjustment bolts underneath the main ramp using the wrench.

Adjusting and Retightening Ramp Height

Setting up the Base

Extending Outrigger Legs

Outrigger Width Adjustment and Feet Leveling

Adjusting outrigger leg width and leveling the feet securely on the floor.

Adjusting Ramp Elevation

Ramp Elevation Adjustment

Loosening elevation levers, sliding the ramp for desired pitch, and retightening levers.

Adjusting The Aiming Point

Rotation and Aiming Point Adjustment

Loosening rotation knobs, aiming the ramp, and retightening knobs without over-tightening.

Tilt To Aim Function

Engaging and Disengaging Tilt-to-Aim

Turning the Tilt-To-Aim knob OFF, tipping ramp back, returning it, and turning knob ON.

Adding Extensions

Attaching Ramp Extensions

Using Ball Magnetic Holder

Using Overhead Extension

Using the Transport Case

Base Removal for Packing

Placing Ramp Components in Case

Care and Cleaning

Cleaning and Fastener Maintenance