6
Troubleshooting
This page is a list, in which may be encountered and their solutions. If the solution listed fails to correct the
problem, call customer service at the address and numbers on the back cover of this manual. Please have the
model number, and serial number of your jack available. The serial number is permanently stamped to the head
plate.
PROBLEM CAUSE / SOLUTION
Fails to lift load..............................................Inadequate air pressure, do not exceed 200-psi.
Air line leaks, locate and correct leaks.
Overloaded, use larger capacity jack.
Fails to hold load............................................Locking pin not engaged.
To Next Page
Loading...