EasyManua.ls Logo

Grease Guardian X Series User Manual

Grease Guardian X Series
29 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Automatic Grease
Removal Unit
INSTALLATION
OPERATION
MAINTENANCE
EDITION: JAN 2019
CONTROLLER PROGRAM: DX2
GGX7S/230VAC, GGX7C/230VAC,
GGX15/230VAC, GGX15C/230VAC,
GGX25/230VAC, GGX35/230VAC
GGX7C/110VAC, GGX15/110VAC,
GGX15C/110VAC, GGX20/110VAC,
GGX25/110VAC, GGX35/110VAC
Question and Answer IconNeed help?

Do you have a question about the Grease Guardian X Series and is the answer not in the manual?

Grease Guardian X Series Specifications

General IconGeneral
BrandGrease Guardian
ModelX Series
CategoryKitchen Appliances
LanguageEnglish

Summary

Plumbing and Mechanical Installation

Plumbing Sequence and Ventilation

Guide for inlet pipe-work, ventilation tee, and branch pipe installation.

Flow Control, Pipework, and Venting

Covers flow control, wastewater pipework, and outlet vent pipe details.

Electrical Installation and Startup

Electrical Installation Requirements

Critical electrical installation requirements and qualifications.

Startup Procedure

Step-by-step guide for correctly starting up the unit.

User Operation and Safety

Important Safety Points for Users

Key safety precautions for operating the unit.

Grease Guardian Controller: Cycle Programming

Setting Daily Cycle Times (Screen 2)

How to set daily cycle start/finish times (T1-T4).

Choosing a Skim Mode (Screen 3)

Explains how to select skimming modes (Low, Medium, High).

Heater Setting Configuration (Screen 4)

How to set the heater and preheat times.

Weekday Cycle Configuration (Screen 5)

How to program daily cycles to ON/OFF for weekdays.

Spray Bar Settings (Screen 6)

How to set the spray bar to active or inactive and adjust times.

Daily Maintenance Procedures

Strainer and Oil Container Maintenance

Steps for daily maintenance including strainer and oil container.

Troubleshooting Common Issues

Unit Not Removing Grease

Diagnosing issues when the unit fails to remove grease.

230V Wiring Diagram

110V Wiring Diagram

10 Year Anti-Perforation Tank Warranty

Tank Warranty Terms and Void Conditions

Covers tank warranty terms and conditions that will void it.