To Next Page
D
derekmaldonadoAug 17, 2025
What to do if product is not metering in GREAT PLAINS Seeders?
- CChristian HuntAug 17, 2025
To address the issue of product not metering in your GREAT PLAINS Seeders, you should open to the correct position, check the tube routing, and ensure everything is clean. Also, try to loosen and agitate the product, clear any blockages, and check for tube kinking. Furthermore, inspect and clean the manifold by removing expansion plugs, and check the blower, increasing RPM if the gauge indicates it's needed.
General
