X240 and X200 (H5) Components (Face Lift)
Note:
• Remote Programming on Face lift X240 and X200 is performed using the X431
Scan Tool.
• Version 33 or above is required for successful communication with the BCM.
Central locking controller
Folding Key Blank (Comes complete
with remote and immobilizer chip)
Non Folding key without remote (Does NOT
come with the immobilizer chip)
Immobilizer
Module
X240
N/A (Controlled by BCM)
3704800XK80XA 3704015A-K00
-
3605130-K00
X200 3704010XK02XA 3704030XK02XA
3704015A-K00
3605110-K00
3704800XK80XA
3704030XK02XA
3704010XK02XA
3605130-K00
6
To Next Page
Loading...