EasyManua.ls Logo

Great GT-417 User Manual

Default Icon
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Question and Answer IconNeed help?

Do you have a question about the Great GT-417 and is the answer not in the manual?

Great GT-417 Specifications

General IconGeneral
BrandGreat
ModelGT-417
CategoryTransceiver
LanguageEnglish

Summary

Operating Controls and Functions

Channel Selector

Controls transmitter and receiver frequency simultaneously for 6-channel operation.

Volume-On/Off

Turns unit on/off and controls sound output from speaker. Volume does not affect transmitting.

Squelch Control

Quiets receiver when no signals are present. Adjust until quieted for optimal performance.

Push-To-Talk Bar

Press to transmit and release to receive, controlling both transmitter and receiver.

CHG Jack

Allows charging of rechargeable batteries without removing them from the unit.

POWER Jack

Allows the use of an external 12-volt DC power source, such as an adapter.

Operations

Initial Setup and Power On

Install batteries, extend antenna, turn on unit, and adjust volume to desired level.

Squelch Control Adjustment

Adjust squelch to minimize background noise and interference while maintaining signal reception.

Channel Selection

Ensure the channel switch is set to the desired channel for 6-channel operation.

Transmitting Operation

Press Push-To-Talk to transmit, speak clearly into microphone, avoid transmitting without antenna.

Receiving Operation

Release Push-To-Talk to receive, adjust volume for best reception and desired listening level.

Antenna Positioning

Hold antenna in vertical position for best transmission and reception performance.

Crystal Arrangement

Schematic Diagram