To Next PageTo Next PageWhat to do if my GREATLAND WMG-TOE1032J fails to operate?
If your GREATLAND Lawn Mower fails to operate, here are a few things to check: * Ensure the power is turned on. * Try using another mains socket in case the current one is faulty. * Inspect the extension cable for any damage and replace it if necessary. * If the mower is in long grass, increase the height of cut and tilt the mower.
Why does my GREATLAND WMG-TOE1032J Lawn Mower leave a ragged finish?
If your GREATLAND Lawn Mower is leaving a ragged finish or the motor labours, it could be due to several reasons: * The height of cut may be too low, so increase it. * The cutting blade might be blunt and needs replacement. * The underside of the machine could be badly clogged, requiring cleaning. * The blade might be fitted upside down; refit it correctly.
How to fix excessive vibration or noise in GREATLAND WMG-TOE1032J?
Excessive vibration or noise in your GREATLAND Lawn Mower can often be attributed to: * A loose blade nut/bolt, which needs tightening. * A damaged cutting blade, which should be replaced.
What to do if the cutting blade is not rotating on my GREATLAND WMG-TOE1032J?
If the cutting blade of your GREATLAND Lawn Mower is not rotating while the machine is switched on: * Check for any obstructions and clear them. * Ensure the blade nut/bolt is tightened.
Why does my GREATLAND WMG-TOE1032J Lawn Mower function intermittently?
If your GREATLAND Lawn Mower functions intermittently, the extension cable may be damaged. Inspect the cable and replace it if necessary.
Standard warning symbol indicating a potential hazard.
Symbol indicating the necessity to consult the user manual.
Warning about projectiles and maintaining safe distance.
Alert regarding sharp blades and necessary precautions.
Indicates electrical safety feature, no earth connection required.
Details the guaranteed sound power level and cutting width.
Crucial instructions to read and follow prior to operating the mower.
Instruction to keep manual; emphasize adherence to safety rules.
Emphasizes user knowledge of instructions and machine operation.
National rules may limit operator age; ensure user is aware.
Recommendations for appropriate footwear and clothing.
Inspect zone for objects; check mower for damage.
Check cables for wear; warning not to touch damaged cables.
Use in daylight, avoid wet grass, and follow slope operation rules.
Procedures for starting, stopping, and safely tilting the mower.
Safety for ejection opening and prohibit transport with power.
Ensure stop before work; general maintenance checks.
Guidelines for storing the mower, including long-term and winter.
Suggests using an RCD for enhanced electrical safety.
Steps for removing the power plug before maintenance or use.
Match voltage; recommend RCD for socket protection.
Use specified cables; avoid damage from heat, oil, edges.
Verify voltage, switch off for work, note blade rotation.
Avoid touching plug with wet hands; handle cables carefully.
Machine is double insulated; states operating voltage.
Extension lead specs and requirement for gloves near blades.
Operator condition, footwear, and weather precautions.
Lists and identifies key parts of the lawn mower.
Guidance for assembling the lawn mower, including grass catcher.
Ensure mower is off; check blade/fasteners before adjusting.
Steps for adjusting front and rear wheel cutting heights.
Lists the three available cutting height positions.
Connect to mains, secure cable, and follow starting procedure.
Procedures for stopping; explanation of safety button.
Caution on blade rotation; safety for maintenance.
Secure grass bag; maintain safety distance from blade.
Overlapping lines, sharp blades, height management, slope mowing.
Guidelines for cleaning the mower and maintaining the blade.
Procedures for sharpening or replacing the blade.
Safety during blade handling; caution regarding impeller.
Recommends authorized professional for blade replacement.
Detailed steps for changing the mower blade.
Instructions for storing the mower long-term or for winter.
Lists technical data, sound power, and vibration levels.
Information on spare parts and contact for service.
How to get support for maintenance, repairs, and spare parts.
Details warranty period, coverage, limitations, and exclusions.
Procedure for warranty claims and conditions for cancellation.
Manufacturer's liability limits and warranty period clarification.
Guidelines for environmentally safe disposal of the machine.
Always disconnect power before troubleshooting.
Identifies causes and solutions for non-operation.
Addresses problems with the machine operating intermittently.
Solutions for ragged cuts and motor labouring.
Troubleshooting steps for blade rotation and excessive noise/vibration.
General| Brand | GREATLAND |
|---|---|
| Model | WMG-TOE1032J |
| Category | Lawn Mower |
| Language | English |
