Need help?Do you have a question about the GReddy PRofec B-specII and is the answer not in the manual?
General| Type | Electronic Boost Controller |
|---|---|
| Peak Hold | Yes |
| Learning Function | Yes |
| Compatible Vehicles | Universal |
| Power Supply | 12V |
| Display | Digital |
| Control Type | Closed Loop |
| Boost Settings | 2 |
| Maximum Boost Pressure | 2.0 kg/cm² |
| Features | Warning Function |
| Weight | 200g |
| Control Method | Solenoid Valve |
Product is for off-road use only and requires 12V systems.
Emphasizes specialist installation, driver view, and battery disconnection.
Details safe operating environments and procedures.
Warns about engine damage from improper tuning and requires expert knowledge.
Highlights LCD, boost control range, preset settings, and warning features.
Covers engine cooling, battery disconnection, and necessary tools.
Visual guide for connecting components in an actuator-type system.
Illustrates system changes for factory solenoid valves (Dual Port/Single Port).
Illustrates system changes for single port actuators with factory solenoid valves.
Routing hoses from fuel regulator to the interior.
Connecting routed hoses to the main unit via a filter.
Step-by-step guide for installing the valve unit on actuator-type systems.
Step-by-step guide for installing the valve unit on external wastegate systems.
Connecting the valve unit harness through the firewall to the main unit.
Securing the main unit using provided double-sided tape.
Ensures parts are reinstalled, battery reconnected, and connections secured.
Instructions for integrating the optional switching harness for HI/LO mode.
Details SELECT, MODE switches, and SET knob functions.
Identifies power harness, pressure ports, and optional connectors.
Procedure to select between HI and LO boost modes.
Procedure to switch displayed pressure unit between kPa and psi.
Adjusting the desired boost pressure duty cycle.
Adjusting boost consistency and valve sensitivity.
Configuring an alarm for over-boost conditions.
Reducing boost duty rate when WARNING threshold is met.
Shows the highest recorded boost value, even after battery disconnect.
Displays the last recorded boost after accelerator release.
Lists default values for key controller parameters.
Guidance on adjusting settings for optimal boost control.
Details available optional accessories and their costs.
Provides contact information and warranty coverage details.
To Next Page
