Operating Procedures / Photos
10. Disassemble Gas and Liquid Valves
Unscrew the two bolts fixing gas valve and liquid
valve.Unsolder weld spots between gas valve and
and air-return pipe to remove the gas valve.
Unscrew the two bolts fixing liquid valve. Unsolder
weld spots between liquid valve and capillary to
remove the liquid valve.
(Note:During unsoldering ,wrap the valves with
wet cloth to avoid damage for high temperature.)
Bolts
11. Disassemble Compressor
Unscrew the three foot-nuts at the foot of the
compressor, take out the compressor.
Liquid Valve
Gas Valve
Nut
Weld spots
To Next Page
Loading...
