19
OPERATION OF WIRED TETHER CONTROLLER
X-FAN MODE
The X-Fan function may only be selected in Cool and Dry modes. After the unit is turned Off,
the X-Fan function will keep the indoor fan running for 2 minutes to dry the indoor evaporator
coil to help avoid mold and mildew growth.
X-Fan Settings
Turn the unit On and select Cool or Dry mode. Press Function button until X-fan icon is
displayed and then press Enter/Cancel to activate this function.
Turn On the unit, select Cooling
or Dry mode.
Press Function until the X-fan icon is displayed.
Press Enter/Cancel to start X-fan
mode.
Cancel X-Fan Mode
To cancel, press Function button to re-enter the
X-Fan settings, then press Enter/Cancel button.
To Next Page
Loading...
