Gree FLR09HP230V1AF

OPERATION OF WIRED TETHER CONTROLLER
I-FEEL MODE
The indoor unit will sense room temperature at the wired Tether Controller instead of at the
return air section of the indoor unit.
I-Feel Settings
Press the Function button until the I-Feel icon is displayed, then press Enter/Cancel to
activate the function.
20
F
Turn Unit On.
Press Function until the I-Feel icon is displayed. Press Enter/Cancel to start I-Feel
mode.
To cancel, press Function button to re-enter the
I-Feel settings, then press Enter/Cancel button.
Cancel I-Feel Mode
Indoor Unit Room Sensor A
Tether Controller Indoor Room Sensor B