To Next PageTo Next PageWhat to do if my Gree ForestAir 13-04590 doesn't operate?
If your Gree Air Conditioner doesn't operate or only runs in fan mode, first ensure the power cord is securely plugged into the wall outlet. Then, check if the main power supply is on. In case of a power failure, wait for the power to restore and then wait 3 minutes before restarting the unit. Finally, for some models, check if the timer is on and adjust the time settings accordingly.
Why is my Gree ForestAir 13-04590 not cooling efficiently?
If your Gree Air Conditioner's cooling is not efficient, start by clearing any obstructions from the air inlets and outlets, such as curtains or blinds. Ensure the exhaust control is set to CLOSED (on some models). Remove any heat sources from the room. Clean the air filters and adjust the set temperature. Increase the fan speed or change the unit mode, and verify the unit's capacity using the room cooling chart. If the unit is freezing up, set the fan speed to highest and the temperature to coolest and wait for the frost to melt.
What to do if my Gree ForestAir 13-04590 starts and stops frequently?
If your Gree Air Conditioner starts and stops frequently, or frequently blows fuses or trips the circuit breaker, ensure the outdoor temperature is within the unit's working range (above 18oC or 65oF). Check that the power source voltage is properly rated according to the unit's rating plate and adjust if necessary. Also, ensure that the unit is not connected to an extension cord and that no other appliance is plugged into the same circuit. For dirty or obstructed internal evaporator and outside condenser coils, call SUNRISE TRADEX Customer Service.
How to stop water from dripping inside from my Gree ForestAir 13-04590?
If water drips from your Gree Air Conditioner into the house, it may not be correctly installed or properly leveled. The unit should slope slightly downward to the outside (half a bubble on the level). Reposition or shim the unit if necessary.
General| Brand | Gree |
|---|---|
| Model | ForestAir 13-04590 |
| Category | Air Conditioner |
| Language | English |
Lists 20 numbered safety precautions for using the air conditioner.
Lists required tools, accessories, and hardware for installation.
Instructions for unpacking, electrical needs, and installation recommendations.
Guidelines for selecting and preparing a suitable window for installation.
Steps to prepare the unit, including attaching expandable panels.
Final steps for installing the air conditioner in the window and securing it.
Explains the function of each button and indicator on the LCD control panel.
Instructions for operating the unit in cooling mode and setting temperature/fan speed.
Instructions for operating the unit in ventilation-only mode.
Details on power saver mode, setting timers, and filter cleaning indicator.
Explains the functions of buttons on the remote control for operating the unit.
Describes the mechanical controls for exhaust, fan speed, and temperature settings.
Instructions for cleaning the air filter and the exterior housing of the unit.
Guidance on proper storage of the air conditioner unit.
Describes normal operating noises and potential vibrations during use.
Lists contact details for replacement parts, technical support, and warranty claims.
Details the terms, duration, and exclusions of the air conditioner's limited warranty.
