To Next PageTo Next Page
Need help?Do you have a question about the Gree GEH09AA-K6DNA1F/I and is the answer not in the manual?
General| Type | Split Air Conditioner |
|---|---|
| Cooling Capacity | 9000 BTU/h |
| Heating Capacity | 9500 BTU/h |
| Energy Efficiency Ratio (EER) | 3.21 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.1 |
| Power Supply | 220-240V, 50Hz |
| Refrigerant | R32 |
| Noise Level (Outdoor) | 50 dB |
| Operating Temperature (Cooling) | 18°C to 43°C |
| Noise Level (Indoor) | 39 dB(A) |
Defines the meaning of DANGER, WARNING, CAUTION, and NOTICE symbols.
Lists manufacturer's non-responsibilities for product misuse or external factors.
Details the R32 refrigerant and provides critical safety warnings.
Safety rules for children, cleaning, and general user maintenance.
Covers self-repair, abnormal operation, and handling the emergency switch.
Focuses on electrical safety regulations and grounding during installation.
Emphasizes safe wiring practices, grounding, and power supply requirements.
Guidelines for plug accessibility, relocation, and selecting a safe location.
Identifies and describes the various parts of the indoor unit, including filters.
Introduces the remote control and its basic functions.
Explains specific buttons like ON/OFF, MODE, FAN, and TEMP for unit operation.
Covers SWING, I FEEL, Sleep, Timer, Light, and WiFi functions.
Outlines cleaning steps for the front panel and remote controller.
Details cleaning and replacing air filters, including the photocatalytic filter.
Covers checks for the outdoor unit and preparation for long periods of non-use.
Lists common problems, their causes, and troubleshooting steps for the unit.
Covers selecting the location, preparing the wall, and mounting the indoor unit.
Details refrigerant piping, connections, wiring, and leakage checks.
Step-by-step guide for installing the outdoor unit, including pipe and wire connections.
Explains the process of vacuum pumping and methods for detecting refrigerant leaks.
Covers essential post-installation checks and the procedure for testing unit operation.
