Gree GKH12K3FI - Page 131

U-Match Series DC Inverter Service Manual
128
4. Assemble
compressor
1. Fix the new compressor
on to the chassis;
2. Connect the suction port
and discharge port of
compressor with the system
pipes;
3. Properly connect the
pwoer cord of compressor;
4. Renew the compressor
electric heating belt and
discharge temperature
sensor;
5. Check if the compressor
rotates in reverse and if the
lubricant have leaked.
5. Assemble unit
Assemble the unit in the
reverse procedures of
disassembly.
 18k
Disassembly and Assembly of external casing
Remark :
Step
Illustration
Handling Instruction
1. Remove external
casing
1. Remove the top cover and
handle;
2. Remove the grille, outer
case and right side plate.
2. Remove motor
1. Remove the blade nut and
then remove the blade;
2. Remove the motor from
motor support.