Need help?Do you have a question about the Gree GMV-121WL/C-T and is the answer not in the manual?
General| Heating Capacity | 13.5 kW |
|---|---|
| Refrigerant | R410A |
| Indoor Unit Dimensions (WxHxD) | Varies by indoor unit type. Refer to specific indoor unit model. |
| Weight (Indoor Unit) | Varies by indoor unit type. Refer to specific indoor unit model. |
| Noise Level (Indoor Unit) | Varies by indoor unit type. Refer to specific indoor unit model. |
| Operating Temperature (Cooling) | -5°C to 48°C |
Comprehensive list of outdoor unit models with their specifications, including cooling/heating capacity and power supply.
Decoding the model number structure for GREE VRF outdoor units.
Highlights the advanced features of the DC Inverter Multi VRF System II.
Detailed specifications for cooling capacity, noise, power supply, and dimensions across various models.
Defines the cooling and heating operational temperature limits and capacity adjustment factors.
Explains the refrigerant cycle and component functions within the VRF system.
Schematic of unit control logic and interpretation of sensors and switches.
Introduction to the central management system for air conditioners via network.
Guides on software installation, computer connection, and parts introduction for system configuration.
Ensures safe installation by covering preparation, personnel qualifications, and common installation problems.
Specifies requirements for refrigerant piping, condensate water pipe, insulation, and communication cables.
Covers checking, site selection, carrying, fixing, and damping procedures for outdoor units.
Defines minimum clearances around the outdoor unit for proper ventilation and maintenance.
Step-by-step guide for initial system setup, including preparation and debugging stages.
Lists all malfunction codes for wired controllers and status codes for outdoor unit indicators.
Provides flowcharts to diagnose and resolve issues like communication errors and protection triggers.
Illustrates and describes the function of crucial components like the compressor and oil separator.
Step-by-step instructions for disassembling the outdoor unit's panels and fan assembly.
Detailed guides for removing and replacing the compressor, 4-way valve, and electronic expansion valve.
Guidelines for selecting and operating vacuum pumps for system drying.
Procedure for calculating and adding refrigerant, including examples and notes on pipe length.
Explains the importance, steps, and precautions for conducting a leak test on the refrigerant piping.
Visual guides showing the assembly of outdoor units and comprehensive lists of part codes.
To Next Page