Need help?Do you have a question about the Gree GMV-140WL/C-X and is the answer not in the manual?
General| Cooling Capacity (kW) | 40.0 |
|---|---|
| Heating Capacity (kW) | 45.0 |
| Energy Efficiency Ratio (EER) | 3.21 |
| Coefficient of Performance (COP) | 3.61 |
| Refrigerant | R410A |
| Type | VRF (Variable Refrigerant Flow) |
| Power Supply | 380-415V/3Ph/50Hz |
| Indoor Unit Noise Level | Varies depending on indoor unit type and fan speed (e.g., 30-45 dB(A)) |
Lists various outdoor unit models with specifications like capacity and power supply.
Presents detailed technical specifications for various outdoor unit models in a table.
Details the Gree Commissioning Tool Kits for monitoring and control.
Covers safety precautions and preparation steps for unit installation.
Outlines the process and precautions for debugging the VRF unit after installation.
Lists common malfunction codes and status indicators for the unit.
Provides a flowchart to diagnose and resolve communication issues between units.
Offers a flowchart for troubleshooting high-pressure protection faults.
Provides a flowchart for diagnosing and fixing low-pressure protection errors.
Offers a flowchart for troubleshooting discharge temperature protection faults.
Provides troubleshooting steps when the unit or main board does not power on.
Outlines requirements and procedures for vacuum drying the system.
Details the process for filling and charging refrigerant into the system.
Explains the importance and procedure for performing an airtightness test on the system.
To Next Page