EasyManua.ls Logo

Gree GUD100ZD/A-T - User Manual

Gree GUD100ZD/A-T
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner's Manual
Original Instructions
Air Conditioners
DC Inverter U-match Series Floor ceiling Type Unit
Models:
Indoor Unit Outdoor Unit
GUD35ZD/A-T GUD35W/NhA-T
GUD50ZD/A-T GUD50W/NhA-T
GUD71ZD/A-T GUD71W/NhA-T
GUD85ZD/A-T GUD85W/NhA-T
GUD100ZD/A-T GUD100W/NhA-T GUD100W/NhA-X
GUD125ZD/A-T GUD125W/NhA-T GUD125W/NhA-X
GUD140ZD/A-T GUD140W/NhA-T GUD140W/NhA-X
GUD160ZD/A-T GUD160W/NhA-X

Other manuals for Gree GUD100ZD/A-T

Question and Answer IconNeed help?

Do you have a question about the Gree GUD100ZD/A-T and is the answer not in the manual?

Gree GUD100ZD/A-T Specifications

General IconGeneral
RefrigerantR410A
Power Supply220-240V, 50Hz
Operating Temperature (Heating)-7-24°C
Air Flow (Indoor)1600 m³/h
Dimensions (Outdoor Unit)980x790x427 mm
TypeDucted
Energy Efficiency Ratio (EER)3.2
Operating Temperature (Cooling)18°C to 43°C

Summary

Gree Air Conditioner Owners Manual

DC Inverter U-match Series Floor Ceiling Unit Models

Lists specific indoor and outdoor unit models for the DC Inverter U-match Series Floor Ceiling Type.

1 Safety Notices

Special Warnings and Prohibitions

Highlights critical safety precautions, prohibitions, and installation restrictions for appliance use.

Prohibited Operations and Installation Warnings

Details prohibited actions and installation warnings, including electrical and refrigerant safety.

Installation Safety, Cleaning, and Drain Pipe Notices

Covers installation safety, cleaning precautions, and guidelines for drain pipe arrangement.

3 Installation

3.1 Installation Preparation

Details prerequisites for installation, including refrigerant safety and construction area requirements.

3.1.2 Selection of Installation Location

Provides guidelines for choosing suitable locations for both indoor and outdoor units, including safety warnings.

3.1.4 Diagram of Unit Installation Space and Location

Illustrates required space and location diagrams for outdoor unit installation.

Outdoor Unit Installation Space Requirements

Details spacing requirements for outdoor units, including tables for single and multiple unit installations.

Outdoor Unit Installation Configurations

Provides spacing guidelines for installing outdoor units in rows and stacked configurations.

Stacked Outdoor Unit Installation Space Diagrams

Illustrates spacing requirements for stacking outdoor units vertically.

3.2 Unit Installation

3.2.1 Indoor Unit Installation

Provides step-by-step instructions for installing the indoor unit, including preparation and disassembly.

3.2.1.2 Indoor Unit Installation Steps

Details the process of mounting the indoor unit using hangers and securing it in place.

3.2.2 Outdoor Unit Installation

Outdoor Unit Installation Guidelines

Covers securing the outdoor unit, drainage considerations, and installation on solid ground.

3.2.3 Connection Pipe Installation

3.2.3.1 Installation Notice and Requirements

Provides crucial notices and requirements for connecting the refrigerant pipes between units.

3.2.3.4 Connection Pipe of Indoor and Outdoor Units

Details the process of connecting indoor and outdoor unit pipes, including tightening torque and insulation.

3.2.4 Connection Pipe Vacuum Pumping and Leak Detection

3.2.4.1 Vacuum Pumping Procedure

Details the procedure for performing vacuum pumping on the refrigerant circuit to remove air and moisture.

3.2.4.2 Leak Detection Methods

Describes acceptable methods for detecting refrigerant leaks, emphasizing electronic detectors and safety.

3.2.5 Refrigerant Adding

3.2.6 Installation of Drain Pipe

3.3 Electrical Installation

3.3.2 Electrical Parameters

3.3.3 Power Cord and Communication Cord Connection

Electrical Wiring Procedures

3.4 Check after Installation

3.5 Test Running

5 Maintenance

5.2 Error Code

5.3 Unit Maintenance

5.4 Notice on Maintenance

Related product manuals