DC Inverter U-match Series Duct Type Unit
Item
Model
Drain pipe
(outer dimension)(mm)
GUD50P/B-S
Ɏ25
GUD71PH/B-S
GUD100PH/B-S
GUD125PH/B-S
GUD140PH/B-S
(2) For the unit with the condensate pump, two drain ports at the bottom are
defaulted to be factory plugged with drain caps. After the installation of
the drain hose, these two drain ports also need to be insulated properly
with the same way aforementioned.
(3) The lifted installation height of drainage pipe is less than 1,000mm, as is
shown in the following figure.
Unit:mm
To Next Page
Loading...
