DC Inverter U-match Series Duct Type Unit
3.2.6.4 Check Drainage
After piping work is finished, check if drainage flows smoothly.
As shown in the figure, add approximately 1liter of water slowly into the drain
pan and check drainage flow during COOL running.
3.2.7 Installation of the Duct
3.2.7.1 Dimensions of the Supply Air Outlet/Return Air Inlet
Supply Air Outlet
Return Air Inlet
Unit: mm
Item
Model
Supply Air Outlet Return Air Inlet
GUD50P/B-S
122 885 1000 200
GUD71PH/B-S
219 743 900 260