GREE U-Match 5 SERIES UNIT SERVICE MANUAL
81
Note: Before removing the front panel, make sure power is cut off.
●Attach the grill back in place and
tighten up the screws.
9. Install the front side plate.
●Tighten up the screws around
the front side plate.
10. Install the upper cover plate.
●Tighten up the screws around
the upper cover plate.
Model: GUD35W/NhA-T, GUD50W/NhA-T, GUD71W/NhA-T, GUD85W/NhA-T
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
●Loosen the securing screws of
the wires with a screwdriver.
●Remove the wires.
Note: When removing the wires,
mark the wire terminals
corresponding to their color so as
to avoid misconnection.