Gree GUD71ZD/A-T

GREE U-Match 5 SERIES UNIT SERVICE MANUAL
83
Removal of compressor
Note: Before removing the compressor, make sure there is no refrigerant in the pipeline and power is cut off.
Step
Picture
Work instruction
6．Connect the compressor suction
port and exhause port with the
pipes.
●Weld the compressor
connection pipes and connect
them to the compressor.
Note: When replacing the
compressor, avoid touching the
nearby pipeline and components.
7．Connect the compressor wires.
●Connect the compressor wires
to the wire terminals on the top of
compressor.
Note: When connecting the
wires, be sure to match the colors
with the corresponding wire
terminals.
Model: GUD35W/NhA-T, GUD50W/NhA-T, GUD71W/NhA-T, GUD85W/NhA-T
Removal of 4-way valve
Note: Before removing the 4-way valve, make sure refrigerant is fully discharged from the unit and power is cut off.
Step
Picture
Work instruction
1. Take off the electromagnetic coil
of the 4-way valve.
●Carefully unscrew the screws of
electromagnetic coil with a
screwdriver.