Gree GUHD18ND3FO - Page 136

U-Match Series DC Inverter Service Manual
133
5. Loosen the screws
fixing the motor
Use screwdriver to loosen the screws
fixing the motor.
6. Remove the motor and
replace it
Remove the motor and replace it.
7. Tighten the screws
fixing the motor
Use screwdriver to tighten the screws
fixing the motor.
8. Mount the fan and
tighten the fixing bolts
Mount the fan and use spanner to tighten
the bolts fixing the fan.
9. Mount the water tray
and tighten the screws
Use screwdriver to loosen the screws
fixing the water tray.