U-Match Series DC Inverter Service Manual
135
5. Connect the drainage
pipe and tighten the
screws fixing the water
pump.
Connect the drainage pipe and use
screwdriver to tighten the screws fixing the
water pump.
6. Mount the water tray
and tighten the screws
Use screwdriver to loosen the screws
fixing the water tray.
4.2.3 Floor Ceiling Type
Model: GTH30D3FI/GTH36D3FI/GTH42D3FI
Disassembly of panel grating module
Remark: Make sure that the power supply is cut off before disassembling and protect all the parts during disassembly. Do not
put filter screen near the high temperature heat source.
Disassembly of sub-assy
of front grill
1. Unscrew the 2 clasps of the upper grill
and the 2 screws of the clasps.
2. Open the grill, disassemble the 2 down
clasps to remove the grill.
Disassembly of right and left finishing plates
Remark: Make sure the power supply is cut off before disassembling and protect all the parts during disassembly. Do not
scratch the outer parts.
To Next Page
Loading...
