To Next PageTo Next PageWhy is my Gree GUHD36NM3FO not heating well?
If your Gree Air Conditioner isn't heating effectively, begin by cleaning or replacing the air filter. Make sure that all doors and windows are firmly closed. Increase the set room temperature. Check for refrigerant leaks. If the outdoor temperature is below -5°C, consider using an alternative heating source. Finally, check the control loop for any abnormalities.
What to do if my Gree GUHD36NM3FO won't start?
If your Gree Air Conditioner won't start, first check the power supply connection. If that's not the issue, inspect for electrical leakage and reset the leakage switch. Also, ensure the operating keys are unlocked. Finally, check the control loop for any failures.
Why is my Gree GUHD36NM3FO Air Conditioner not cooling properly?
If your Gree Air Conditioner isn't cooling well, start by cleaning or replacing the air filter. Also, reduce any heat sources or the number of people in the room. Ensure all doors and windows are closed, and remove any obstructions from the air intake or outlet. Check that the set temperature isn't too high and inspect for refrigerant leakage. If the issue persists, the room temperature sensor may need checking or replacing.
What to do if my Gree Air Conditioner has a malfunction of the outdoor ambient temperature sensor?
General| Refrigerant | R410A |
|---|---|
| Phase | 1 |
| Compressor Type | Inverter |
| Cooling Capacity | 36000 BTU/h |
| Heating Capacity | 36000 BTU/h |
| Power Input (Heating) | 3273 W |
Key warnings and cautions for safe operation and installation.
Specific safety guidelines to follow during the installation process.
Steps for flaring, bending, and connecting pipes between units.
Guidance on insulating pipes and managing drain pipes.
Procedure for creating a vacuum in the refrigerant circuit.
Instructions for adding refrigerant based on pipe length.
Essential safety measures and precautions for electrical wiring.
