83
6.Remove the sound blanket.
Lift and remove the
sound blanket (top).
1
Untie the strings and
open the sound blanket.
2
3
1
7.Remove the partition plate.
Since the piping ports on
the sound blanket are torn
easily, remove the blanket
carefully.
Sound blanket.
Lift and remove the
sound blanket (body) as it
is opened.
4
Pull the sound blanket
(inner) out.
Since the piping ports on
the sound blanket are torn
easily, remove the blanket
carefully.
Loosen the screw of the
four way valve coil.
Provide a protective sheet or a
steel plate so that the brazing
f l a m e c a n n o t i n f l u e n c e
peripheries.
Be careful so as not to break
the pipes by pressing it
excessively by pliers when with-
drawing it.
C a u t i onC a u t i on
C a u t i onC a u t i on
C a u t i on
Be careful about the four way
valve, pipes and so on, which
were heated up by a gas
brazing machine, so as not
to get burnt your hands.
sound blanket
screw
Removal Procedure
To Next Page
Loading...
